banner

Features Of Stainless Steel Vacuum Flask

Feb 12, 2022

In fact, the length of the heat preservation time of the vacuum thermos depends on the structure of the cup body and the thickness of the cup material.

Generally speaking, the thinner the cup material, the longer the holding time. However, the cup body is easily damaged and deformed, which affects the service life; measures such as coating the outer layer of the vacuum cup with metal film and copper plating can also increase the degree of heat preservation; large-capacity, small-diameter vacuum cups have a longer heat preservation time, on the contrary, small-capacity vacuum cups , The large-diameter vacuum insulation cup has a short holding time; the service life of the vacuum cup also depends on the cleaning of the inner layer of the cup and the time of vacuuming, and the most important thing is the structure of the vacuum furnace.

The vacuum equipment used in the society for vacuuming vacuum flasks includes vacuum exhaust table and vacuum brazing furnace, and there are about two types and four types. One type is benchtop with tail vacuum exhaust; the other type is brazing furnace type. The brazing furnace type is further divided into: single chamber, multi-chamber, and multi-chamber with increased pumping speed.

Single furnace type integral vacuum brazing furnace. The vacuuming cycle of the furnace is long. If the manufacturer wants to improve production efficiency and shorten the vacuuming time, it will affect the service life of the cup. The service life of the cup is only about 8 years. The vacuum cup exhaust table with tail and its advantages: the vacuum cup produced by the vacuum exhaust table with tail exhaust, the heating temperature during vacuuming is about 500 degree , the shell of the vacuum cup is not easy to deform, but the copper pipe welding place is easy to touch Leakage, special protection is required when processing semi-finished products.

In addition, a large category is the vacuum brazing furnace type, which is roughly divided into three types. I didn't expect it. Although the vacuum insulation cups we usually use are no different from the general insulation cups in appearance, the vacuum insulation cups are produced in the production process. Generally, the thermal insulation cup is much more complicated and the technical difficulty is much higher. Therefore, the price of vacuum insulated cups is at least twice as high as that of general insulated cups.


関連ニュース

関連商品